GEM HW134VF CAMEL Geared Elevator Traction Machine
GEM HW134VF CAMEL is an Italian geared elevator traction machine designed for compact VVVF lifts, with up to 1.0 m/s and reliable worm-gear performance for machine-room lift systems.
Description
What is a geared traction machine?
The GEM HW134VF CAMEL is a geared elevator traction machine. A geared machine drives the sheave through a worm or helical gearbox, which multiplies torque and allows a smaller, lower-cost motor to move the same load.
Geared machines are typically specified for machine room (MR) elevator systems at low to medium speeds, and for freight and goods lifts where high starting torque matters more than energy efficiency. Nazar Elevator supplies the GEM HW134VF CAMEL to elevator contractors and distributors worldwide.
Technical Specifications
Frequently Asked Questions
The GEM HW134VF CAMEL Geared Elevator Traction Machine is rated for 2,300 kg without external support, 2,700 kg with external support. Always verify the final capacity against the official data sheet and elevator calculation before ordering.
The GEM HW134VF CAMEL Geared Elevator Traction Machine is designed for the rated speed range. The exact speed configuration depends on roping ratio, sheave diameter and inverter settings.
The GEM HW134VF CAMEL Geared Elevator Traction Machine is a compact VVVF worm-gear traction machine with flywheel on motor side. This design reduces mechanical losses and simplifies maintenance compared to conventional solutions.
up to 480 kg, 1.0 m/s lifts
Yes. Nazar Elevator can supply the GEM HW134VF CAMEL Geared Elevator Traction Machine as part of a complete lift package including cabin, doors, control panel and safety components. Contact our export team for project-specific configurations.
Get a Quote for GEM HW134VF CAMEL Geared Elevator Traction Machine
Contact our team for technical specifications, pricing and delivery details.
Get a Quote